Innokin Endura T18 II Vape Pen Kit 1300mAh

25.00 

Product introduction
Innokin Endura T18 II Kit is a slender Pen style vape kit designed to bring you an unprecedented and better MTL vaping experience. The new version adopts a more fashionable design while maintaining the simple appearance of the original Endura T18. Innokin Endura T18 II also made some changes based on the previous generation in other aspects. Well, for a start, the battery capacity is better, now you can get a 1300mAh battery instead of the 1000mAh on the original. It is charged via micro-USB and features proven safety protections. Also, you have 3 power output settings. You can select from Cool (10.5W), Medium (12W) and Warm (13.5W) to suit your tastes and e-liquid. The Endura T18II has three LED lights located just above the firing button which are activated every time you inhale on the device and light up according to battery status. Three flashing lights signify a full charge, two lights denote half charge and one single flashing light indicates that your battery is very low and requires recharging.
Features
• Stylish and compact vape pen

• 1300mAh Internal Battery

• Battery Life/Wattage Indicator

• Three Power Levels: 10.5W(cool), 12.0W(medium), 13.5W(warm)

• Fully adjustable airflow control

• Adjustable Airflow Control Ring – 4 Inlet Holes

• Magnetic Drip Tip Cap

• Top Fill Design with Twist Off Cap

• Compatible with original T18 coils

• Centered Spring-Loaded 510 Connection

Clear
SKU: N/A Categories: , Tags: , ,

Description

The bundled Prism T18 II Tank is an 18mm diameter tank with 2.5ml max e-liquid capacity, quadruple adjustable airflow, and a wide bore Delrin drip tip. Innokin Endura T18 II Tanks also has a clever magnetic lid system. When not in use, the lid is magnetically fixed to the mouthpiece to prevent dust or substances from entering the drip tip. The tank uses a 1.5ohm Prism coil with an organic cotton wick for superior flavor. Endura T18 II Tank is compatible with T18/T22 replaceable coil. With four airflow holes, you can adjust the airflow of T18 II tank by gently rotating the black ring at the bottom of the tank according to your favorite inhalation method to expose or cover the air holes. For a restricted and tight airflow, just close off some or all of the air holes until you reach your desired airflow. For a loose and airy vape, simply leave more air holes exposed.

Parameters
Product Name: Endura T18II

Device Dimensions: φ18mm(Diameter)*145mm(Height)

Capacity: 2ml/2.5ml

Coil Resistance: 1.5ohm(13.5W max)

Coil Material: Kanthal

Battery: 1300mAh Built-in Battery

Minimum / Maximum Wattage: 10.5W, 12W, 13.5W

Minimum / Maximum Voltage: 4.0V – 4.5V

Cut-off time: 15S

Maximum Tank Diameter: 18mm

Maximum Output Current: 3.9A

Resistance Range: 1.2ohm – 3.9ohm

Body Material: Stainless Steel

Thread Material: SS

Thread Type: 510

Charging Current: 500mA

Charging Port: Micro USB

Colors: Black, Blue, Coffee, Rainbow, SS, Violet

Innokin Endura T18 II Vape Pen Kit 1300mAh comes with
1×Endura T18II Battery(1300mAh)

1×Prism T18II Tank

2×1.5Ω Coils

1×Magnetic Cap

1×Spare Drip Tip

1×Spare O-Ring Set

1×USB Charging Cable

1×Quick Start Guide

1×User Packet(Warranty Card, Warning Booklet, Battery Warning Card)

Additional information

Innokin Endura T18 II Kit

Blue, Coffee, lack, Rainbow, Silver, Violet